PerformanSe 64301

Zinc Primary Alkyl Di thiophosphate

“PERFORMANSE 64301” refers to Zinc Primary Alkyl Dithiophosphate, which is a multi-functional additive component with outstanding anti-wear and anti-oxidation properties, as well as corrosion inhibiting property. This product can be used in not only diesel engine oil, gasoline engine oil but also industrial oils. The recommended treat rate is 0.5%-2.5% (m%).

TECHNICAL SPECIFICATION

Item	Index	Test Method
Appearance	Light yellow to amber transparent liquid	Visual Inspection
Density (20℃), kg/m3	1070-1140	SH/T0604, ASTM D4052
Kinematic Viscosity (100℃), mm2/s	Report	GB/T265, ASTM D445
Flash Point (COC), ℃	≥160	GB/T3536, ASTM D92
Zn Content, m%	8.5-9.5	NB/SH/T0824, ASTM D4951
P Content, m%	7.6-8.4	NB/SH/T0824, ASTM D4951
S Content, m%	15.0-18.0	SH/T0303, ASTM D1552

PRODUCT STORAGE/HANDLING/TRANSPORTATION/PACKAGE

• The product is packed in iron drums with a net weight of 200kg/drum, applicable to various modes of transportation.
• The maximum storage and transportation temperature shall not exceed 45℃, and the shelf life is 2 years.
• In case of accidental contact with skin, wash it off thoroughly with water and detergents.

PerformanSe 64302

“PERFORMANSE 64302” is Zinc Butyl Octyl Primary Alkyl Dithiophosphate (ZDDP). This product features favorable anti-oxidation and anti-corrosion performance and anti-wear and extreme pressure properties. It can effectively protect engine bearings from corrosion and prevent oil viscosity growth due to oxidation in a high temperature. The product is light in color and nice in oil solubility and additive compatibility. It can be widely adopted in various industrial lubricating oils such as gear oil and hydraulic oil. Combined with detergents and dispersants, the product can be used to produce all grades engine oils. The dosage is 0.5%-3.0%.

PRODUCT TECHNICAL INDEX

ITEM	INDEX	TEST METHOD
Appearance	Amber transparent liquid	Visual Inspection
Color Number	≤2.0	ASTM D1500
Flash Point (COC), ℃	≥180	ASTM D92
Kinematic Viscosity (100℃), mm2/s	Report	ASTM D445
Density (20℃), kg/m3	1080-1130	ASTM D4052
S Content, m%	14.5-18.0	ASTM D1552
P Content, m%	7.2-8.5	ASTM D4951
Zn Content, m%	8.5-10.0	ASTM D4951
Moisture, m%	≤0.03	ASTM D95
Mechanical Impurities, m%	≤0.07	GB/T511

PRODUCT STORAGE/HANDLING

The product is packed with iron barrels, with a net weight of 200Kg/barrel, suitable for all means of transport.

For storage and transportation temperature, it shall not surpass 45℃. The product is offered with a guarantee period of two years.

In case of accidental contact with skin, wash it off thoroughly with water and detergents.

PerformanSe 64102

“PERFORMANSE 64102” With long-chain alkylbenzene sulfonic acid as a main raw material, super over based synthetic calcium sulfonate is produced by neutralization and super high alkalization reaction. The product has excellent alkaline storage property, good oil solubility and strong acid neutralization capability, and it can immediately neutralize organic acid and inorganic acid in oil; meanwhile it also has excellent high-temperature detergency and thermal stability. It is a preferred additive for blending over based marine cylinder oil.

PRODUCT TECHNICAL INDEX

ITEM	INDEX	TEST METHOD
Appearance	Red brown transparent viscous liquid	Visual Inspection
Flash Point (COC), ℃	≥180	ASTM D92
Kinematic Viscosity (100℃), mm2/s	60-180	ASTM D445
Density (20℃), kg/m3	1150-1250	ASTM D4052
Total Base Number, mgKOH/g	395-430	ASTM D2896
Ca Content, m%	14.8-16.8	ASTM D4951
S Content, m%	1.25-1.85	ASTM D1552
Moisture, m%	≤0.2	ASTM D95
Mechanical Impurities, m%	≤0.1	GB/T511

PRODUCT STORAGE/HANDLING

Packed in 200 liters iron drum or according to user’s requirement. Transportation mode is by container or truck. The maximum storage temperature shall not exceed 45℃.

This product is non-flammable, non-explosive, and non-corrosive, and it is same as petroleum products in terms of safety, environmental protection, use and other aspects, thus it needs no special protection.

The product is stored with a shelf life of 2 years, and it should avoid contact with strong antioxidant when use.

In case of accidental contact with skin, wash it off thoroughly with water and detergent.

PerformanSe 64103

“PERFORMANSE 64103” Super Overbased Synthetic Magnesium Sulfonate is one of the series of lubricant additives produced by us. It’s mainly made from long-chain linear alkylbenzene sulfonic acid by means of neutralization and high alkalization reaction. As a major metal detergent, this product boasts excellent acid neutralization capacity, good anti-rust property and high-temperature detergency, so it is widely used for different engine oils.

PRODUCT TECHNICAL INDEX

ITEM	INDEX	TEST METHOD
Flash Point (COC), ℃	≥180	ASTM D92
Kinematic Viscosity (100℃), mm2/s	80-150	ASTM D445
Density (20℃), kg/m3	1050-1150	ASTM D4052
Total Base Number, mgKOH/g	395-435	ASTM D2896
Mg Content, m%	8.5-10.0	ASTM D4951
Moisture, m%	≤0.2	ASTM D95
Mechanical Impurities, m%	≤0.1	GB/T511

PRODUCT STORAGE/HANDLING

Packed in 200 liters iron drum or according to user’s requirement. Transportation mode is by container or truck.

The maximum storage temperature shall not exceed 45℃.

This product is non-flammable, non-explosive, and non-corrosive, and it is same as petroleum products in terms of safety, environmental protection, use and other aspects, thus it needs no special protection.

The product is stored with a shelf life of 2 years, and it should avoid contact with strong antioxidant when use.

In case of accidental contact with skin, wash it off thoroughly with water and detergent.